Scytek electronic A1.1 SERIES Manual descarregar pdf (Página 7)

G5.2W, G2.2W, A4.2W, A1.2W - Page 3

Program transmitter(s):

1. Turn on the ignition key On, Off, 4 times and then back On on fifth time.

· The siren will chirp 5 times.

2. Press and hold the Override switch for 5 seconds.

· The siren will chirp 5 times.

· The LED will illuminate.

3. Press Button on the first transmitter.

· The siren will chirp once.

4. Repeat step 3 for each transmitter (up to 4).

5. Turn off the ignition key.

Note:

programming single button transmitter will set the system into a single button mode

operation mode

Remote Transmitter Operation Description

Lock: press and release the button momentarily once - doors will lock within 2 seconds.

Unlock: press and release the button twice within 2 seconds - doors will unlock on the second

button press.

Remote Start/Stop: press and hold the button for 3 seconds the system will remote start/stop.

System Programming

To enter System Programming:

1. Turn on ignition.

2. Within 5 seconds, press the valet switch 5 times.

· The siren will provide three chirps, indicating that you have entered Programming.

3. Press the valet switch the number times equal to the System Option you want to change.

· The siren will chirp each time the valet switch is pressed.

4. Within 5 seconds, press the transmitter button once

. This siren will chirp

Press the valet switch the number times equal to the desired operating system option.

· The siren will chirp to indicate the coresponding setting.

1 chirp = Column 1

2 chirps = Column 2

3 chirps = Column 3

5. When finished, turn off the ignition to save the changes.

One Button Remote Transmitter

A1.1 Series Remote

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Sem comentários

Scytek electronic A1.1 SERIES Manual Página 7